新聞中心
NEWS CENTER
聯系我們
CONTACTS US
濟南皓暉建材有限公司，總部位于中國泉城——山東濟南，是一家專業生產銷售石塑電梯門套，仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年，憑著優質的產品質量和完善的售后服務，在全國各地都有我們的工程案例。
我們本著“以質量求生存 ，靠管理出效益，憑信譽贏口碑,以實干筑輝煌”的經營理念，公司將立足于當代建材現代化發展前沿，依靠科技、勇于探索，以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。
聯系電話： 15853163650
工廠地址：山東濟南章丘區（歡迎廣大客戶來廠勘察）
行業新聞
COMPANY NEWS
仿大理石UV板的保護措施
2018-04-16 10:24:32 文章來源：m.tongma800.com
仿大理石UV板廠家給大家分享一下關于它的保護措施，因為保護不好后期會影響裝修出來的效果，所以下面給大家提出四點保護措施，共大家參考學習。
Copy marble UV board manufacturer about its protective measures, to share with you because of my poor protection affects the effect of decorate out late, so here puts forward four measures for everyone, your reference learning.
第一、對仿大理石UV板進行粗磨，這是粗磨因此不要使用軟水磨片進行研磨，容易出現波浪，影響平整度。
First, and then the coarse grinding the copy marble UV board, this is so not to use soft water grinding coarse grinding of abrasive, prone to wave, affect the flatness.
第二、細磨，細磨占整體大約三分之一的時間，細磨到800#后有初光出現、細磨到2000#后光澤度可達50度。
Second, fine grinding, fine grinding accounted for about a third of the time, after the fine grinding to 800 # light appeared in the early, the glossiness after fine grinding to 2000 # can reach 50 degrees.
第三、精磨，精磨后光澤度提升很高，仿大理石UV板的表面密度提高了，為拋光劑打下堅實的基礎，增強了拋光材料的附著力。
Third, fine grinding, fine grinding after high gloss ascension, marble surface density increased, for the polish to lay a solid foundation, to enhance the adhesion of polishing materials.
第四、拋光，拋光后仿大理石UV板表面光澤度可達最少能在90度以上。
Fourth, polishing, after polishing can copy marble UV plate surface gloss is least in the more than 90 degrees.
Copy marble UV board manufacturer about its protective measures, to share with you because of my poor protection affects the effect of decorate out late, so here puts forward four measures for everyone, your reference learning.
第一、對仿大理石UV板進行粗磨，這是粗磨因此不要使用軟水磨片進行研磨，容易出現波浪，影響平整度。
First, and then the coarse grinding the copy marble UV board, this is so not to use soft water grinding coarse grinding of abrasive, prone to wave, affect the flatness.
第二、細磨，細磨占整體大約三分之一的時間，細磨到800#后有初光出現、細磨到2000#后光澤度可達50度。
Second, fine grinding, fine grinding accounted for about a third of the time, after the fine grinding to 800 # light appeared in the early, the glossiness after fine grinding to 2000 # can reach 50 degrees.
第三、精磨，精磨后光澤度提升很高，仿大理石UV板的表面密度提高了，為拋光劑打下堅實的基礎，增強了拋光材料的附著力。
Third, fine grinding, fine grinding after high gloss ascension, marble surface density increased, for the polish to lay a solid foundation, to enhance the adhesion of polishing materials.
第四、拋光，拋光后仿大理石UV板表面光澤度可達最少能在90度以上。
Fourth, polishing, after polishing can copy marble UV plate surface gloss is least in the more than 90 degrees.
上一篇：內蒙古電梯門套客戶高總
下一篇：仿大理石UV板的質量分析方法
